HP EliteBook 8440p Intel SSD driver for Windows 7 - HP EliteBook 8440p Intel SSD driver from Intel fo

HP EliteBook 8440p Intel SSD LB3I4PC103652CV102M6

HP EliteBook 8440p Intel SSD driver from Intel for Windows XP, Windows Vista, Windows XP

HP EliteBook 8440p Intel SSD driver from Intel for Windows XP, Windows Vista, Windows XP 64 bit, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit

Publisher review for HP EliteBook 8440p Intel SSD LB3I4PC103652CV102M6:

Before install HP EliteBook 8440p Intel SSD LB3I4PC103652CV102M6you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of HP EliteBook 8440p Intel SSD . We recommend to always use most recent version of a driver.

This package provides a tool that will run in Microsoft Windows to update Intel Solid State Drive (SSD) Firmware.Fixes:- Updates the firmware to version LB3i for the Intel SSD 520 Series models.
- Updates the firmware to version 4PC10365 for the Intel SSD 320 Series models.
- Updates the firmware to versions 2CV102M3 and 2CV102M6 for the Intel X25-M and X18-M Mainstream SSD Series models.
- Provides the ability to update the firmware while the Microsoft Windows operating system is running.
- Provides the ability to update the firmware when the full-disk encryption is installed.
- Updates firmware with Windows Operating Systems running.
- Updates firmware when full disk encryption is installed.
- Provides the bootable CD-ROM ISO images to update firmware on local systems and on non-Windows operating systems.

For the Intel SSD 520 Series models:
- Provides improved PHY margin setting to prevented losing the link to the SATA drive.
- Provides the response time when the system resumes from sleep (S3) mode.

For the Intel X25-M and X18-M Mainstream SSD Series models:
- Fixes an issue where the system does not recognize the drive.
- Fixes an issue where the system displays the "Imminent Drive Failure" message during the BIOS Power On Self Test (POST).
- Fixes an issue where the notebook unexpectedly restarts while running the Microsoft Windows operating system.
- Fixes an intermittent issue where the system does not restart (reboot) and displays the "Boot device not found" error message after resuming from hibernation mode.

For the Intel SSD 320 Series models:
- Fixes an intermittent issue where the system does not restart (reboot) and displays the "Boot device not found" error message after resuming from hibernation mode.
- Fixes an issue where data is not completely saved to the hard drive and is
lost when the system is suddenly powered off. Devices supported:- 80GB 1.8 Intel X18-M SSD Drive
- 80GB Intel X25-M SSD Drive
- 160GB 1.8 Intel X18-M SSD Drive
- 160GB Intel X25-M SSD Drive
- 80GB Intel SSD 320 Series Drive
- 120GB Intel SSD 320 Series Drive
- 160GB Intel SSD 320 Series Drive
- 300GB Intel SSD 320 Series Drive
- 180GB Intel SSD 520 Series Drive
- 240GB Intel SSD 520 Series DriveInstallation steps (for exe / zip):1. Save the driver files to your computer.
2. Run the executable or extract the installation files to a location on your disk.
3. Follow the steps displayed by the setup wizard.
4. After installation, restart the computer.
Important notes:- Before installation, save all your work and close all the running programs, as the installation may interfere with other apps;
- If the setup wizard requests Administrative rights, make sure to run the setup as Administrator;
- Pay attention to all installation instructions to make sure the driver is installed correctly;
Operating system:
Windows XP, Windows Vista, Windows XP 64 bit, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit